Professional Stage Lights for Sale: Direct from the Manufacturer

The LP-200Z is a 200W IP65-rated waterproof zoom wash par light — the entry-level zoom model in the VANRAY IP65 par range. A single 200W RGBW 4-in-1 LED source combined with a motorized 6°–60° zoom delivers beam flexibility from narrow spot to wide flood, while IP65 sealing under IEC 60529 enables full outdoor deployment in rain and high humidity.

At 8.5kg in a 365×280×230mm housing, the LP-200Z is slightly heavier than the indoor LP-200ZC (6kg) due to the sealed weatherproof housing. The intelligent silent fan maintains thermal performance during continuous operation.

The LP-200Z occupies a distinct position among the IP65 zoom par models: compared to the LP-740Z (7×40W, 280W) and LP-1515Z (15×15W, 200W), the LP-200Z uses a single-source LED configuration producing a different beam character — a single-source spot profile rather than the distributed multi-chip array pattern. This makes the LP-200Z appropriate when a single-source beam aesthetic is preferred over multi-chip wash character.

The LP-1515Z is a 200W IP65-rated waterproof zoom wash par light using 15 individual 15W 4-in-1 RGBW chips. The 15-chip array produces smooth, even color distribution across the beam — the higher chip count compared to single-source zoom pars reduces color separation at typical throw distances and improves uniformity when illuminating wide surfaces. The motorized 6°–60° zoom is fully DMX-addressable in 11-channel mode, with 8 built-in effect programs accessible via DMX console or standalone operation.

At 7.5kg in a 350×240×343mm housing rated IP65 under IEC 60529, the LP-1515Z balances output capability with portability for rental companies operating across multiple events per week.

The LP-350SJL is a 350W professional theater LED par can designed for the color rendering and uniformity demands of theatrical stage, broadcast studio, and film production environments. Its hybrid LED configuration combines central 4-in-1 full-power 10W chips with CREE 5050 perimeter lamp beads — producing a beam quality closer to traditional theatrical wash sources than standard multi-chip LED pars.

The perimeter CREE 5050 beads deliver soft, even light distribution with reduced color separation — important for naturalistic theatrical lighting where blending with adjacent fixtures and accurate skin tone rendering are priorities. Construction quality reflects professional installation requirements: heat dissipation board coefficient above 1.5 W/(m·K), cold-frost-proof and high-temperature-resistant flexible wiring, and a high-quality switching power supply. Color temperature of the perimeter beads is customizable at the factory to match specific production requirements.

The LP-200ZC is a 200W indoor RGBW zoom wash par light offering the same 6°–60° motorized zoom range as the IP65 outdoor models in a lighter 6 kg housing optimized for indoor stage installation and rental use. The RGBW 4-in-1 LED source at 200W delivers strong color output with smooth mixing, while motorized zoom lets a single fixture serve both tight feature positions and broad ambient wash roles depending on programming needs.

At IP20, the LP-200ZC is designed for controlled indoor environments: theaters, broadcast studios, multipurpose halls, corporate event spaces, and indoor concerts. The intelligent silent fan system minimizes operational noise. The 5-channel mode simplifies operation for basic color and intensity control; 9-channel mode provides full zoom, strobe, and dimming parameter access.

The LP-420B is a 180W pixel-control LED par light with individual DMX addressing of each of its 20 individual 10W 4-in-1 RGBW chips. This per-chip pixel control — available in up to 85CH mode (4 channels per chip × 20 chips + 5 master channels) — enables dynamic chase effects, pixel mapping sequences, and complex animated lighting patterns that standard wash pars cannot produce.

Five DMX channel mode options (5/9/13/81/85CH) scale the LP-420B from simple color wash in basic setups to full pixel control on sophisticated productions. At 3kg in a 272×222×220mm housing, it is one of the lightest fixtures in the VANRAY par range — practical for truss positions where weight loading is constrained. Three lens angle options (25°/45°/60°) allow beam coverage to be matched to the installation geometry at order time.

The LP-1203 is the IP65 outdoor version of the 120×3W high-output LED par wash — the highest output IP65 fixture in the VANRAY par range at 350W with 120 individual 3W LEDs. IP65 sealing under IEC 60529 covers permanent outdoor architectural lighting, festival main stages, and large-scale outdoor event production. Available as LP-1203 (120×3W, 350W) and LP-903 (90×3W, approx. 270W) sharing the same IP65 housing and lens options. At 14kg in a 420×242×360mm housing, appropriate rigging hardware and weight-rated mounting are required.

The LP-336 is an 80W IP65-rated waterproof mini par using 36 individual 3W RGB LEDs (R:12/G:12/B:12) — a pure RGB system without a dedicated white channel. Five lens angle options (8°/15°/25°/45°/60°) at order time make the LP-336 one of the most versatile specifications in the VANRAY range for matching beam characteristics to specific installation geometries. IP65 under IEC 60529. At 4.2kg in a compact 245×192×220mm housing, the LP-336 is a direct compact counterpart to the LP-507 RGBWA model for applications where amber warm color range is not required.